1

(10 replies, posted in Hardware Devices)

Better to open a new field.

after recompiling using acr122u-usb the damn thing works............
No indicator light or beep sond, but it read tags an cards.

frits@frits-hpubuntu:~/Documents/libnfc-1.7.0$ sudo nfc-list -v
[sudo] password for frits:
nfc-list uses libnfc 1.7.0
NFC device: ACS / ACR122U PICC Interface opened
1 ISO14443A passive target(s) found:
ISO/IEC 14443A (106 kbps) target:
    ATQA (SENS_RES): 00  02 
* UID size: single
* bit frame anticollision supported
       UID (NFCID1): 6c  9c  a4  d4 
      SAK (SEL_RES): 18 
* Not compliant with ISO/IEC 14443-4
* Not compliant with ISO/IEC 18092

Fingerprinting based on MIFARE type Identification Procedure:
* MIFARE Classic 4K
* MIFARE Plus (4 Byte UID or 4 Byte RID) 4K, Security level 1
* SmartMX with MIFARE 4K emulation
Other possible matches based on ATQA & SAK values:

0 Felica (212 kbps) passive target(s) found.

0 Felica (424 kbps) passive target(s) found.

0 ISO14443B passive target(s) found.

0 ISO14443B' passive target(s) found.

0 ISO14443B-2 ST SRx passive target(s) found.

0 ISO14443B-2 ASK CTx passive target(s) found.

0 Jewel passive target(s) found.

I'll try dumping and writing now. Report back to this topic, which I abusively hijacked....sorry about that.

2

(10 replies, posted in Hardware Devices)

Hi yobibe,

I did the pcsc_scan,
Initially I get this:
frits@frits-hpubuntu:~/Documents/libnfc-1.7.0$ pcsc_scan
PC/SC device scanner
V 1.4.18 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.7.4
Using reader plug'n play mechanism
Scanning present readers...
0: ACS ACR122U PICC Interface 00 00

Mon Feb 17 19:13:36 2014
Reader 0: ACS ACR122U PICC Interface 00 00
  Card state: Card removed,

The red light glows on the reader, and when putting a tag on it, the reader beeps and shows the following output:

Mon Feb 17 19:08:42 2014
Reader 0: ACS ACR122U PICC Interface 00 00
  Card state: Card inserted,
  ATR: 3B 8F 80 01 80 4F 0C A0 00 00 03 06 03 00 03 00 00 00 00 68
ATR: 3B 8F 80 01 80 4F 0C A0 00 00 03 06 03 00 03 00 00 00 00 68
+ TS = 3B --> Direct Convention
+ T0 = 8F, Y(1): 1000, K: 15 (historical bytes)
  TD(1) = 80 --> Y(i+1) = 1000, Protocol T = 0
-----
  TD(2) = 01 --> Y(i+1) = 0000, Protocol T = 1
-----
+ Historical bytes: 80 4F 0C A0 00 00 03 06 03 00 03 00 00 00 00
  Category indicator byte: 80 (compact TLV data object)
    Tag: 4, len: F (initial access data)
      Initial access data: 0C A0 00 00 03 06 03 00 03 00 00 00 00
+ TCK = 68 (correct checksum)

Possibly identified card (using /home/frits/.smartcard_list.txt):
3B 8F 80 01 80 4F 0C A0 00 00 03 06 03 00 03 00 00 00 00 68
3B 8F 80 01 80 4F 0C A0 00 00 03 06 .. 00 03 00 00 00 00 ..
    Mifare Ultralight (as per PCSC std part3)
3B 8F 80 01 80 4F 0C A0 00 00 03 06 03 00 03 00 00 00 00 68
3B 8F 80 01 80 4F 0C A0 00 00 03 06 03 .. .. 00 00 00 00 ..
    RFID - ISO 14443 Type A Part 3 (as per PCSC std part3)
3B 8F 80 01 80 4F 0C A0 00 00 03 06 03 00 03 00 00 00 00 68
    RFID - ISO 14443 Type A - NXP Mifare Ultralight or UltralightC


Mon Feb 17 19:08:42 2014
Reader 0: ACS ACR122U PICC Interface 00 00
  Card state: Card removed,

Thanks in advance for your help!
If you want I can compile nfc again, and then using acr122_usb.

Regards Frits

P.s:
this is the output of nfc-list:

frits@frits-hpubuntu:~/Documents/libnfc-1.7.0$ sudo nfc-list
[sudo] password for frits:
nfc-list uses libnfc 1.7.0
error    libnfc.driver.acr122_pcsc    No ACR122 firmware received, Error: 80100016
nfc-list: ERROR: Unable to open NFC device: acr122_pcsc:ACS ACR122U PICC Interface 00 00

3

(10 replies, posted in Hardware Devices)

langeron wrote:

The main problem now is the 80100016 error.

Hi,
I have exactly the same problem.
Even the output matches.

For the record, I am on Ubuntu 12.04.4  64 bits
Using Libnfc-1.7.0
Cardreader is the infamous acr122U-A9.

If needed, I can provide the output of the commands.

Any one stumbled on a solution???

Regards Frits